Well Loved - A well loved topsheet shows significant signs of wear and tear including chipping, scratching, and scuffing on a majority of the ski’s surface area.

Fair - A fair topsheet shows some signs of wear and tear on the ski. This includes chipping, scratching and scuffing on high impact areas like ski tips and tails or just in front of the toe piece.

Good - A good topsheet shows minor signs of wear and tear with little tip and tail scratching or chipping, some minor cosmetic scratches across both skis, but no major damage.

Excellent - An excellent topsheet shows almost no signs of wear and tear with no chips, and only a handful of very small scratches or scuffs.

Well Loved - A well loved base shows significant signs of wear and tear. This includes but is not limited to a significant number of long but shallow scratches, multiple deep scratches or gouges that have been repaired, a large scratch or gouge that is inconsistent with the rest of the base condition, or significant edge wear and tear. 

Fair - A fair base shows some signs of wear and tear on the ski. This includes some shallow to medium scratches, a few medium scratches or gouges, and some edge wear and tear.

Good - A good base shows minor signs of wear and tear with little or no shallow/medium scratches, no medium to core depth gouges, and little to no edge wear and tear. 

Excellent - An excellent base shows almost no signs of wear and tear on the base material or edges of the ski. 

Groomers - Groomer skis have a skinnier waist width (typically below 85mm wide) and feature a cambered profile. With a cambered profile, groomer skis have a longer point of contact with the snow, making them more suitable for carved turns on smooth snow. A skinnier waist width allows for quicker transfer from edge to edge, but decreases flotation in new or soft snow. Groomer skis are typically constructed to be stabler than a true all mountain ski, making shorter, sliding pivot-style turns harder to initiate.

All Mountain - All mountain skis have a wider waist width (typically 85mm - 108mm wide) than a groomer ski and often features some form of early rise in the tip. An all mountain ski is well suited to make both carving and sliding pivot-style turns on groomed runs or variable terrain like bumps or trees.

Freestyle - Freestyle skis have a skinnier waist (80mm - 95mm wide) and feature a twin tip for skiing backwards or “switch”. These skis see the most “switch” riding of any ski category and thus are constructed with a more symmetrical width profile so that the skis turn similarly when skiing forwards or backwards. Freestyle skis are generally built to be light but durable so they can withstand larger airs and grinding rails or boxes.

Big Mountain/Powder - Big Mountain/Powder skis have a wide waist width (108mm - 125mm wide) and feature some aspect of rocker in the ski’s profile. Skis in this category are built to float in deep, soft snow, but can vary in stiffness.

Backcountry - Backcountry skis can range widely in waist widths (75mm - 125mm wide) and are built for uphill and downhill travel. These skis are built with weight savings in mind and are less suited for the wear and tear of skiing in-bounds at a resort.

Beginner - Skis, Boards, Boots and Bindings for the beginner skier or boarder are built to be more forgiving and easier to handle on the slopes. Skis and Boards are typically built with foam or wood cores that are more flexible and have shorter radii, making them less challenging to turn. Bindings are generally more pliable than models built for more advanced skiers or boarders.

Intermediate - Skis, Boards, Boots and Bindings for intermediate skiers or boarders generally provide more stability and performance than beginner focused equipment. Skis and Boards generally have medium radiuses with better handling at higher speed while still being forgiving at slower speeds. 

Advanced - Skis, Boards, Boots and Bindings for advanced skiers or boarders generally provide a stiffer, higher performance ride that is better suited for steeper terrain and higher speeds. Skis and Boards generally have medium to large radii. Bindings are generally more rigid and provide better power transfer. 

Expert - Skis, Boards, Boots and Bindings for expert skiers or boarders are built to provide the highest level of precision and power. Skis and Boards are generally on the stiffer side requiring more effort and technique to turn effectively. 

Rocker type refers to the profile of a ski or snowboard from the side view. This refers to the difference in height of an unweighted ski/board at the tip, tail and waist. The rocker type is typically described with the tip profile first, the underfoot profile second, and the tail profile third - TIP/WAIST/TAIL. 

Camber - A cambered ski or board rises in the center when placed on a flat surface, like an “n” shape. Camber provides more resistance when a skier or rider exerts downward forces on the center of the ski or board. This translates to more power, stability and precise edge grip. A cambered ski or board provides better performance on harder snow. 

Rocker - Rocker was first introduced as a way to provide better float in deeper snow. Essentially the opposite of camber, rocker describes a ski or board shape where the center of the board or ski touches the ground and progressively rises towards the tip and tail, like a “U” shape. It is often referred to as “early rise” in the tip. 

Hybrid - Modern skis and boards often incorporate a combination of rocker in the tip and sometimes the tail. A combination of the two provides the maneuverability of rocker with the edge hold of a cambered profile, making the skis or board much more versatile. 

Twin Tip - A ski with a Twin Tip has a tail that is upturned similarly to the tip of the ski. This feature was introduced when freestyle skiing became popular and people started skiing backwards or “switch” more often. A full twin tip is generally indicative of a freestyle focused ski. 

Partial Twin - A ski with a Partial Twin tail has a slightly upturned tail that generally rises to about half the height of the tip, still giving the skier or rider the ability to ride backwards when needed. Though capable of going backwards, these skis or boards are designed to ride forward mainly. 

Flat - The traditional flat tail design has been used for decades in ski construction and provides edge contact through the full length of the tail. These skis are meant to only ski forward. 

Sandwich Construction - A ski with a sandwich construction uses sidewall material around the entire outside of the ski. Sandwich construction provides the most durability and torsional stiffness, but is heavier than a ski with a cap or half cap construction. 

Half Cap Construction - A ski with half-cap construction utilizes sidewall material in the center area of the ski to provide strength and rigidity where the most energy is transferred to the ski. Half cap construction is used to cut down on overall weight of the ski while still providing higher durability and torsional stiffness than a full cap construction. 

Cap Construction - A ski with cap construction uses no sidewall material at all. Instead, the topsheet material folds over the top and around the sides of the core. Cap construction provides the least torsional stiffness and is found on softer, more forgiving skis. Cap construction also creates an overall lighter ski than half-cap or sandwich constructions. 

Alpine - Traditional alpine bindings are built to work with classic flat-soled ski boots. This style of binding will not work safely with boots that have a GripWalk or touring sole. 

MNC - MNC stands for “Multi Norm Compatible” and is the binding standard that provides the widest range of compatibility. MNC bindings work with boots that have Alpine ISO 5355, Touring ISO 9523, GripWalk or WTR soles. 

GripWalk - Bindings designated as GripWalk compatible will only accommodate Alpine ISO 5355 or GripWalk soled boots. Though some boots with other sole types may fit into these bindings, they will not release properly or safely. 

WTR - WTR bindings are certified to work only with boots with WTR, GripWalk or Alpine ISO 5355 soles. These bindings are not compatible with Touring ISO 9523 or Non ISO Certified soles. 

Non ISO Certified - These bindings are designed to accommodate boots with tech fittings. This includes most Touring ISO 9523 boots and touring boots that do not meet ISO standards. Though all fall under the pin binding category, some bindings may have a different style of heel. It is always best to check with a certified ski technician to determine compatibility between boots and bindings. 

DIN is the industry standard measurement of force required to release a skier’s boots from their bindings. The scale ranges from 0.5 to about 18. A recommended Din setting is calculated based on the skier’s height, weight, age, skier type (1 through 3), and boot sole length. A lower DIN value indicates an easier release and is meant for lighter or more beginner skiers. 

For your safety, always have a certified binding technician help determine your release settings and binding adjustment. This information is meant to help you choose a binding that has a range suitable for your recommended DIN.

All ski boots are measured by their boot sole length (measured in mm). Depending which bindings are mounted to your skis, you have a certain amount of adjustability. Demo bindings can accommodate the widest range of boot sole lengths, while most traditional alpine bindings can accommodate for about 2 boot sizes. It is always recommended to check with a certified binding technician to see if a ski’s current binding mount will work with your specific boot without a remount.